Step	System	Action
1	Sight mode knob	A/G
2	Delivery mode knob	OFFSET BOMB or TGT FIND
3	(WSO) Target find switch	HOLD
4	Navigation mode knob	NAV COMP
5	HSI mode switches	NAV COMP
6	(WSO) INS mode knob	NAV
7	(WSO) Navigation mode selector switch	NAV COMP
8	(WSO) WRCS input counters	SET
		a. Target distance N IS -100-foot increments
		b. Target distance E/W - 100-foot increments
		c. IP altitude MSL - 100-foot increments
		d. Release range - 10-foot or 100-foot increments (OFFSET BOMB)
		e. Release range - LABS pullup range, 10-foot or 100-foot increments
		f. Release advance - Milliseconds (OFFSET BOMB if required)
9	Weapon select knob	BOMBS (OFFSET BOMB)
10	AWRU	SET
		a. Interval controls - SET
		b. Quantity knob - SET
11	Nose/tail arm switch	ON (as required)
12	Station select	LOADED STATION(S)
13	Master arm switch	ARM
14	(WSO) Dual timers	SET
		a. Pullup timer - T1
		b. Release timer - T2
15	(WSO) Release gyro	SET
		a. Low angle (LOFT) - DEG

Step	System	Action
1	(WSO) Radar power	OPR
2	(WSO) Radar mode	MAP PPI
3	(WSO) Antenna stab switch	NOR
4	(WSO) Cursor intensity	ADJUST
5	(WSO) Antenna elevation	ADJUST
6	(WSO) Scan switch	WIDE
7	(WSO) Radar range	AI 10 or AI 25

Step	System	Action
1	(WSO) Operate along track control	Position range cursor over RIP
2	(WSO) Operate cross track control	Position offset cursor over RIP
3	(WSO) Freeze button	PUSH ON
4	(WSO) Target insert button	PUSH ON
		The steering instruments display steering commands when the target insert button is pushed ON, and the cursor intersection will position over the target location and track the target. If the target is on the scope, set the target elevation on the ALT RANGE counter and touch up the cursors over the target.
5	Bomb release button	PRESS and HOLD (OFFSET BOMB)
		a. At bomb release, pullup light - ON
		b. When a station is empty, station ARM light - OFF
	When the aircraft is on course to the target and at the preplanned release altitude and airspeed, press and hold the bomb release button until the bomb is released, as indicated by illumination of the pullup light.

Step	System	Action
1	(WSO) When over IP, freeze button and target insert button	PUSH ON
2	Bomb release button	PRESS and HOLD (OFFSET BOMB)
		a. At bomb release, pullup light - ON
		b. When a station is empty, station ARM light - OFF
		When the aircraft is on course to the target and at the preplanned release altitude and true airspeed, press and hold the bomb release button until bomb release occurs, indicated by the illumination of the pullup light.

Step	System	Action
1	Delivery mode knob (LABS)	Bomb Run LABS/TGT Find AS REQUIRED Select the planned delivery mode. NOTE: With the target find switch on HOLD, the delivery mode selector may be positioned to any LABS mode without losing WRCS function.
2	(WSO) Along track and cross track controls	Bomb Run LABS/TGT Find AS REQUIRED (Visual or Radar IP)
3	(WSO) Freeze button	Bomb Run LABS/TGT Find PUSH ON
4	(WSO) Target insert button	Bomb Run LABS/TGT Find PUSH ON
5	(WSO) After target insert, activate switch	Bomb Run LABS/TGT Find ON Select the ON position only after steering instruments have transitioned to the target.
6	At warning tone (T 1 start)	Bomb Run LABS/TGT Find INITIATE PULLUP
7	Bomb button	Bomb Run LABS/TGT Find PRESS and HOLD